CG132-12 Gas Generator Set

US
Metric

Overview

Gas Generator Sets Specification

Maximum Continuous Rating
600 ekW
Fuel Type
Natural Gas, Biogas, Coal Gas
Maximum Electrical Efficiency
42.0%
Maximum Standby Rating
-
Frequency
50/60Hz
RPM
1500/1800rpm

Engine Specification

Engine Model
CG132

Engine Specifications

Bore
5.20 in
132.00 mm
Stroke
6.30 in
160.00 mm
Displacement
1605.00 in³
26.30 l
Aspiration
TA

Generator Set Dimensions

Length
148.00 in
3759.20 mm
Width
59.00 in
1490.00 mm
Height
86.00 in
2184.40 mm
Dry Weight - Genset
13778.75 lb
6249.94 kg

Gas Generator Sets Specification

Maximum Electrical Efficiency
42.00%
Maximum Standby Rating
-

Engine Specifications

Engine Model
CG132
Features

Lower Operating Costs

Optimized engine components mean the CG132 uses up to 50 percent les lubricating oil than competing generator sets, which means more money stays in your company's pockets.

Smaller footprint

The CG132 uses nearly 50 percent less space than similar system. Less space means lower installation costs.

System Control

Control the entire system, not just the engine, with the Cat Total Electronic Management System. Features like temperature and pressure monitoring for each cylinder and anti-knock control allow for maximum power output and the best possible fuel utilization, even if gas composition changes.

Flexible Fuel Usage

Our gas-mixer technology and Total Electronic Management System let you use a wide variety of gases, including problematic gases like digester, landfill and sewage gases

Flexible Fuel Usage

Our gas-mixer technology and Total Electronic Management System let you use a wide variety of gases, including problematic gases like digester, landfill and sewage gases

Standard Equipment
  • Air Inlet
    • Turbocharger for the CG132-8 with a water-cooled bearing case
    • Two-element single-stage air cleaner with enclosure and service indicator
  • Control Panels
    • TEM(Total Electronic Management)
  • Cooling
    • Jacket water and SCAC thermostats
    • Cat flanges on SCAC circuit
    • Electrical jacket water and aftercooler coolant pump
    • Flanged coolant outlet
  • Exhaust
    • Closed crankcase ventilation system
    • PEARL/Low resistence exhaust system
  • Fuel system
    • Electronic fuel metering valve
    • Independently controlled cylinder monitoring and ignition system
    • Pre-chamber spark plugs
  • Generator
    • Reactive droop
    • Bus bar connections
    • Winding temperature detectors
    • Anti-condensation space heater
    • 3-phase sensing and KVAR/PF control
  • Starting/Charging
    • 24V starting motors
    • Battery disconnect switch
  • General
    • Crankshaft vibration damper and guard
Optional Equipment
  • Air Inlet
    • Mounting stand
    • Air cleaner with precleaner
  • Cooling
    • CHP skid