Gas Generator CG132
US
Metric
Overview
CG132 Gas Generator Set
Gas Generator Sets Specification
Maximum Continuous Rating
800 ekW
Fuel Type
Natural Gas, Biogas, Coal Gas
Maximum Electrical Efficiency
42.5%
Maximum Standby Rating
-
Frequency
50/60Hz
RPM
1500/1800rpm
Engine Specification
Engine Model
CG132
Engine Specifications
Bore
5.20 in
132.00 mm
Stroke
6.30 in
160.00 mm
Displacement
2136.00 in³
35.00 l
Aspiration
TA
Generator Set Dimensions
Length
162.60 in
4130.00 mm
Width
59.00 in
1490.00 mm
Height
86.00 in
2184.40 mm
Dry Weight - Genset
15498.34 lb
7030.00 kg
Gas Generator Sets Specification
Maximum Electrical Efficiency
42.50%
Maximum Standby Rating
-
Engine Specifications
Engine Model
CG132
Features
Lower Operating Costs
Optimized engine components mean the CG132 uses up to 50 percent les lubricating oil than competing generator sets, which means more money stays in your company's pockets.
Smaller footprint
The CG132 uses nearly 50 percent less space than similar system. Less space means lower installation costs.
System Control
Control the entire system, not just the engine, with the Cat Total Electronic Management System. Features like temperature and pressure monitoring for each cylinder and anti-knock control allow for maximum power output and the best possible fuel utilization, even if gas composition changes.
Flexible Fuel Usage
Our gas-mixer technology and Total Electronic Management System let you use a wide variety of gases, including problematic gases like digester, landfill and sewage gases
Sales Features
Standard Equipment
- Air Inlet
- Two-element single-stage air cleaner with enclosure and service indicator
- Turbocharger for the CG132-8 with a water-cooled bearing case
- Control Panels
- TEM (Total Electronic Management)
- Cooling
- Engine driven water pumps for jacket water and after cooler
- Jacket water and SCAC thermostats
- Cat flanges on SCAC circuit
- Electrical jacket water and aftercooler coolant pump
- Flange connections for JW inlet and outlet
- ANSI/DN customer flange connections for JW inlet and outlet
- Cat flanges on SCAC circuit
- Exhaust
- Closed crankcase ventilation system
- PEARL/Low resistence exhaust system
- Fuel system
- Electronic fuel metering valve
- Pre-chamber spark plugs
- Independently controlled cylinder monitoring and ignition system
- Generator
- Reactive droop
- Bus bar connections
- Winding temperature detectors
- Anti-condensation space heater
- 3-phase sensing and KVAR/PF control
- Starting/Charging
- 24V starting motors
- Battery disconnect switch
- General
- Crankshaft vibration damper and guard
Optional Equipment
- Air Inlet
- Mounting stand
- Air cleaner with precleaner
- Cooling
- CHP skid
WARNING